Guarantee of quality
Fluid equipment product made of fluorine resin
Food, Pharmaceutical, Semiconductor & LCD
Since the liquid contact point is made of PTFE and PFA, such liquid contact point will not be affected by almost all chemicals.
■Features◆Since the body is made of PTFE and PFA, the valve of this series is compatible to each chemical liquid.◆The valve of this series is applicable to a wide temperature range(0°C - 100°C).◆Since the valve of this series is of integral super-300 type Pillar fitting, it can be readily connectable.
■Performance- Operation method: Manual- Connection: Super-300 type Pillar fitting™- Maximum working pressure:0.7MPa(*1)- Maximum working temperature:100°C(*1)- Fluid used:Liquid*1: For 60°C, the working pressure may change, depending on temperature.The following valves are also available in addition to those shown above.Type Flow adjustment valve-Maximum working pressure(MPa):0.7*1-Working temperature(°C):0 - 100Type Air vent valve-Maximum working pressure(MPa):0.3*1-Working temperature(°C):0 - 80Type Check valve-Maximum working pressure(MPa):0.7*1-Working temperature(°C):0 - 150*1 For 60°C, the working pressure may change, depending on temperature
SPERA300 PTFE BELLOWS PUMP Without PULSATION
Static pressure type non-contact gas seal Pillar PEC seal(R) Type PEC Pat.JAPAN
Super-300 TYPE PILLAR FITTING™
Cartridge type Mechanical seal PILLAR CASSETTE SEAL(R) Type GAKEM
PILAFLON™ PFA TUBE
PILLAR segment seal PILLAR No.4392S