Mechanical seals, NIPPON PILLAR PACKING Co.,Ltd.

Since the liquid contact point is made of PTFE and PFA, such liquid contact point will not be affected by almost all chemicals.

---

■Features

◆Since the body is made of PTFE and PFA, the valve of this series is compatible to each chemical liquid.
◆The valve of this series is applicable to a wide temperature range(0°C - 100°C).
◆Since the valve of this series is of integral super-300 type Pillar fitting, it can be readily connectable.

---

■Performance

- Operation method: Manual
- Connection: Super-300 type Pillar fitting(R)
- Maximum working pressure:0.7MPa(*1)
- Maximum working temperature:100°C(*1)
- Fluid used:Liquid
*1: For 60°C, the working pressure may change, depending on temperature.

The following valves are also available in addition to those shown above.

Type Flow adjustment valve
-Maximum working pressure(MPa):0.7*1
-Working temperature(°C):0 - 100
Type Air vent valve
-Maximum working pressure(MPa):0.3*1
-Working temperature(°C):0 - 80
Type Check valve
-Maximum working pressure(MPa):0.7*1
-Working temperature(°C):0 - 150
*1 For 60°C, the working pressure may change, depending on temperature